Micro-computed tomographic evaluation of the shaping ability of three nickel-titanium rotary systems in the middle mesial canal of mandibular first molars: an ex vivo study based on 3D printed tooth replicas.

BACKGROUND: The preparation of the middle mesial (MM) canal of mandibular molars represents a challenge because it is often curved, narrow, and close to the root concave. The purpose of this study was to evaluate the ex vivo shaping ability of 3 nickel-titanium (NiTi) rotary systems in the MM canal using 3D printed resin tooth replicas. METHODS: A permanent mandibular first molar with a MM canal was acquired from a pool of extracted teeth and reproduced by a 3D printer. The resin tooth replicas (n = 18) were equally assigned to 3 groups for the evaluation of the shaping abilities of 3 NiTi rotary systems (OneShape [OS], Twisted Files [TF], and ProTaper Gold [PTG]) according to the manufacturer's recommendations. The tooth replicas were scanned by micro-computed tomography (micro-CT) twice before and after instrumentation of the mesiobuccal (MB), mesiolingual (ML), and MM root canals. After 3D reconstruction, the canal straightening, change of root canal volume and surface area, the mesial and distal canal wall thickness and canal transportation at the levels of 1, 2, and 3 mm below furcation were assessed. One-way variance analysis and Turkey's post hoc test were used for comparisons of the means among different groups, and paired-t test was used to compare the mesial and distal sides of the mesial roots. RESULTS: As compared with OS and TF, the use of PTG in preparation of MM canals resulted in significantly more straightening of canal curvature (p < 0.05), greater post-instrumentation canal volume and surface area, and thinner mesial and distal remaining canal wall thickness at 1, 2 and 3 mm below furcation (all p < 0.05). Regarding the root canal transportation in the mesiodistal direction, there was no significant difference among the 3 instruments (all p > 0.05) after the preparation of the MB and ML canals. However, in the MM canal, more pronounced transportation was detected in the PTG group at 2 mm below furcation, and in the TF group at 3 mm below furcation as compared with the other 2 systems (both p < 0.05). CONCLUSIONS: 3D printed tooth replicas have the advantages of consistency and can be an ideal model to evaluate the shaping ability of different instruments in the MM canal. OS and TF files performed similarly and both are appropriate for shaping the MM canal, while PTG may cause excessive and uneven resin removal, especially near the furcation, and may lead to root fragility and procedural errors.

Ex vivo detection of mandibular incisors' root canal morphology using cone-beam computed tomography with 4 different voxel sizes and micro-computed tomography.

BACKGROUND: In recent years, cone-beam computed tomography (CBCT) has been widely used to evaluate patients' root canal anatomy due to its high resolution and noninvasive nature. As voxel size is one of the most important parameters affecting CBCT image quality, the current study evaluated the diagnostic potential of CBCT with 4 different voxel sizes in the detection of double root canal systems and accessory canals (ACs) in permanent mandibular incisors. METHODS: A total of 106 extracted mandibular permanent incisors were collected from the dental clinics, and then were scanned by using micro-CT with a voxel size of 9 µm. The teeth were then fixed in the tooth sockets of human dry mandibles and scanned by using a CBCT device with 4 different voxel sizes (300, 200, 250, and 125 µm). Four observers detected in blind the root canal morphology of the teeth according to the CBCT images, and the presence or absence of a double root canal system, and the presence or absence of ACs, were scored according to a 5-point scale, respectively. Receiver operating characteristic (ROC) analysis was performed, and DeLong test was used to compare the area under the curve (AUC) values and the micro-CT data was taken as a gold standard. RESULTS: Among 106 sample teeth, 25 specimens with a double root canal system were identified by the micro-CT. ROC curve analysis of the data obtained by the four observers showed that in the detection of double root canal systems, the AUC values ranged from 0.765 to 0.889 for 300 µm voxel size, from 0.877 to 0.926 for 250 µm voxel size, from 0.893 to 0.967 for 200 µm voxel size, and from 0.914 to 0.967 for 125 µm voxel size (all p < 0.01). In general, we observed a trend that the AUC values, sensitivity, and specialty increased with the decrease in the voxel size, and significantly higher AUC values were detected in 125 µm voxel size images. In the detection of ACs, ROC curve analysis showed that among the four observers, the AUC values ranged from 0.554 to 0.639 for 300 µm voxel size, from 0.532 to 0.654 for 250 µm voxel size, from 0.567 to 0.626 for 200 µm voxel size, and from 0.638 to 0.678 for 125 µm voxel size. CBCT images at a voxel size of 125 µm had a weak diagnostic potential (AUC: 0.5-0.7, all p < 0.05) in the detection of AC, with a lower sensitivity ranging from 36.8 to 57.9% and a higher specialty ranging from 73.6 to 98.8%. CONCLUSIONS: CBCT with 300 µm voxel size could only provide moderate diagnostic accuracy in the detection of a double canal system in mandibular incisors. CBCT with a voxel size of 125 µm exhibited high diagnostic value in the detection of double canal systems, while showing low but statistically significant value in the detection of ACs.

Synthesis of Porous MgAl-LDH on a Micelle Template and Its Application for Efficient Treatment of Oilfield Wastewater.

In this paper, a series of porous hierarchical Mg/Al layered double hydroxides (named as LDH, TTAC-MgAl-LDH, CTAC-MgAl-LDH, and OTAC-MgAl-LDH) was synthesized by a simple green hydrothermal method using wormlike micelles formed by salicylic acid and surfactants with different carbon chain lengths (0, 14, 16, and 18) as soft templates. BET, XRD, FTIR, TG, and SEM characterizations were carried out in order to investigate the structure and properties of the prepared materials. The results showed that the porous hierarchical CTAC-MgAl-LDH had a large specific surface area and multiple pore size distributions which could effectively increase the reaction area and allow better absorption capability. Benefiting from the unique architecture, CTAC-MgAl-LDH exhibited a large adsorption capacity for sulfonated lignite (231.70 mg/g) at 25 °C and a pH of 7, which outperformed the traditional LDH (86.05 mg/g), TTAC-MgAl-LDH (108.15 mg/g), and OTAC-MgAl-LDH (110.51 mg/g). The adsorption process of sulfonated lignite followed the pseudo-second-order kinetics model and conformed the Freundlich isotherm model with spontaneous heat absorption, which revealed that electrostatic adsorption and ion exchange were the main mechanisms of action for the adsorption. In addition, CTAC-MgAl-LDH showed a satisfactory long-time stability and its adsorption capacities were still as high as 198.64 mg/g after two adsorption cycles.

Coupled Fe(III) reduction and phenanthrene degradation by marine-derived Kocuria oceani FXJ8.057 under aerobic condition.

Diverse aerobic actinobacteria possess the capacity to degrade polycyclic aromatic hydrocarbons (PAHs) and have recently been shown to reduce Fe(III). However, the coupling of the two processes under oxic conditions remains unclear. Here, the co-metabolism of phenanthrene (PHE) and Fe(III) by marine-derived Kocuria oceani FXJ8.057 was realized under aerobic condition. In the presence of both PHE and Fe(III), the rates of PHE degradation (83.91 %) and Fe(III) reduction (50.00 %) were synchronously enhanced, compared to those with PHE (67.34 %) or Fe(III) (38.00 %) alone. Transcriptome analysis detected upregulation of PHE biodegradation and riboflavin biosynthesis in the strain cultured with both PHE and Fe(III) compared to that with PHE alone. Metabolite analysis indicated that, with the addition of Fe(III), the strain could efficiently degrade PHE via three pathways. Moreover, the strain secreted riboflavin, which acted as a shuttle to promote electron transfer from PHE to Fe(III). It also secreted organic acids that could delay Fe(II) reoxidation. Finally, H2O2 secreted by the strain caused extracellular Fenton reaction to generate •OH, which also played a minor role in the PHE degradation. These findings provide the first example of an aerobic bacterium that couples PAH degradation to Fe(III) reduction and extend our understanding of Fe(III)-reducing microorganisms.

Alleviation Effects of GQD, a Traditional Chinese Medicine Formula, on Diabetes Rats Linked to Modulation of the Gut Microbiome.

Gegen Qinlian Decoction (GQD) is a Chinese herbal medicine that has been reported to significantly decrease blood glucose levels, which is suggested to be related to interactions with the gut microbiota. However, the protective effect of GQD on intestinal barrier function with regard to its influence on the gut microbiota has not been explored to date. In this study, we investigated the role of the gut microbiota in mediating the hypoglycemic mechanism of GQD in type 2 diabetes mellitus (T2DM) rats induced by a single intraperitoneal injection of streptozotocin after 4 weeks of high-fat diet feeding. The T2DM rats were randomly allocated to receive GQD, metformin (Met), or saline for 12 consecutive weeks, and changes in metabolic parameters, intestinal barrier function, and inflammation were investigated. Gut microbiota was analyzed using 16S rRNA gene sequencing from fecal samples, and statistical analyses were performed to correlate microbiota composition with phenotypes of the T2DM rats. GQD administration decreased the levels of blood glucose and inflammatory cytokines, and increased the levels of tight junction proteins. Besides, GQD had a protective effect on islet function, restoring intestinal permeability, and inhibiting inflammation, as evidenced by increases in the levels of serum C-peptide, occludin, and claudin-1 in the colon, and also improved the expression of serum inflammatory factors. In addition, GQD regulated the structure of the gut microbiota by increasing the proportions of short-chain fatty acids-producing and anti-inflammatory bacteria, and decreasing the proportions of conditioned pathogenic bacteria associated with the diabetic phenotype. Overall, these findings suggest that GQD could ameliorate hyperglycemia and protect islet function by regulating the structure of the gut microbiota, thereby restoring intestinal permeability and inhibiting inflammation in T2DM rats. Our study thus suggests that the hypoglycemic mechanism of GQD is mediated by its modulation of the gut microbiota.

Enhanced Removal of Sulfonated Lignite from Oil Wastewater with Multidimensional MgAl-LDH Nanoparticles.

In this study, hierarchical MgAl-LDH (layered double hydroxide) nanoparticles with a flower-like morphology were prepared under a hydrothermal condition by employing worm-like micelles formed by cetyltrimethylammonium bromide (CTAB) and salicylic acid (SA) as templates. The morphology and structure of the materials were characterized by Brunauer-Emmett-Teller (BET), SEM, and XRD analyses. The performance for the adsorption of sulfonated lignite (SL) was also investigated in detail. FTIR was used to detect the presence of active functional groups and determine whether they play important roles in adsorption. The results showed that the hierarchical MgAl-LDH nanoparticles with a specific surface area of 126.31 m2/g possessed a flower-like morphology and meso-macroporous structures. The adsorption capacity was high-its value was 1014.20 mg/g at a temperature of 298 K and an initial pH = 7, which was higher than traditional MgAl-LDH (86 mg/g). The adsorption process of sulfonated lignite followed the pseudo-second-order kinetics model and conformed to Freundlich isotherm model with a spontaneous exothermic nature. In addition, the hierarchical MgAl-LDH could be regenerated and used, and the adsorption was high after three adsorption cycles. The main adsorption mechanisms were electrostatic attraction and ion exchange between the hierarchical MgAl-LDH and sulfonated lignite.

MicroRNA-125a-3p participates in odontoblastic differentiation of dental pulp stem cells by targeting Fyn.

Fyn is a member of the protein tyrosine kinase family and its overexpression is associated with various types of inflammation. MicroRNAs can regulate the expression of target genes and play an important role in varied physiological and pathological processes. Based on the important role of Fyn and microRNA-125a-3p (miR-125a-3p) in inflammation, and combined with the bioinformatics studies, we performed in this study and chose miR-125a-3p as the focus of our research. During the progression of inflammation, we found that the expression of miR-125a-3p was decreased while the expression of Fyn was up-regulated. Fyn formed a complex with Neuropilin-1, which inhibited odontoblastic differentiation and expanded inflammatory responses through nuclear factor-κB signal pathways in dental pulp stem cells (DPSCs). These findings suggested that miR-125a-3p plays an important role in odontoblastic differentiation of DPSCs by targeting Fyn, implying its therapeutic potential in dental caries.

The Mouse Gut Microbial Biobank expands the coverage of cultured bacteria.

Mice are widely used as experimental models for gut microbiome (GM) studies, yet the majority of mouse GM members remain uncharacterized. Here, we report the construction of a mouse gut microbial biobank (mGMB) that contains 126 species, represented by 244 strains that have been deposited in the China General Microorganism Culture Collection. We sequence and phenotypically characterize 77 potential new species and propose their nomenclatures. The mGMB includes 22 and 17 species that are significantly enriched in ob/ob and wild-type C57BL/6J mouse cecal samples, respectively. The genomes of the 126 species in the mGMB cover 52% of the metagenomic nonredundant gene catalog (sequence identity ≥ 60%) and represent 93-95% of the KEGG-Orthology-annotated functions of the sampled mouse GMs. The microbial and genome data assembled in the mGMB enlarges the taxonomic characterization of mouse GMs and represents a useful resource for studies of host-microbe interactions and of GM functions associated with host health and diseases.

A High-Sensitivity Methane Sensor with Localized Surface Plasmon Resonance Behavior in an Improved Hexagonal Gold Nanoring Array.

This paper proposes a methane sensor based on localized surface plasmon resonance (LSPR) of a hexagonal periodic gold nanoring array. The effects of structural parameters on the extinction spectrum and refractive index (RI) sensitivity are analyzed to obtain optimal parameters. In particular, the RI sensitivity can reach 550.08 nm/RIU through improvement of the sensor structure, which is an increase of 17.4% over the original value. After coating a methane-sensitive membrane on the inner and outer surfaces of the gold rings, the methane concentration can be accurately measured with a gas sensitivity of -1.02 nm/%. The proposed method is also applicable to quantitative analyses of components concentration and qualitative analyses of gas composition.